Learning Center - Netcomm. Sharing experience

How to setup IP camera with Win XP

1. Enter TCP/IP Configuration

What you will need:

• IP Camera (from the NetComm NS4xxx range)
• ADSL Modem (e.g. NetComm NB5580W)
• Wireless Ethernet Bridge (e.g. NetComm NP5410g) for wirelessly connecting the IP Camera to the ADSL Modem
• ADSL connection

Getting started:

1. Ensure that you have a connection to the internet.
2. Power on the IP Camera and your PC.
3. Connect the camera to your PC using the cross-over cable provided. Confirm that you have two solid red lights on the rear of the camera. If you see a green/yellow flashing light you are probably not using a cross-over cable but an Ethernet CAT5 network cable. In this case, change to a cross-over cable.
4. Open the Local Area Network connection (Start -> Settings -> Network Connections) for the NIC (Network Interface Card) connecting your camera and PC.

5. Click on 'Properties' -> scroll down to and select Internet Protocol (TCP/IP):

6. Then select TCP/IP Properties and enter the following values:

7. Close all windows

IP Camera Home | Camera Configuration